Agrinol MGE
TS U 23.2-30802090-016-2003
Agrinol MGE Oils are used as working liquids in hydraulic drives, hydrotransmissions and circulating oil systems of various units, machines and mechanisms which constitute a part of the equipment of industrial enterprises, agricultural, constructing and road-building machines.
Agrinol MGE-4A oils are recommended for usage at the following ambient temperature:
From minus 45 °С up to 70 °С;
Agrinol MGE-10 А – from minus 35 °С up to 90 °С;
Agrinol MGE-22B, -46V, -68V – from minus 10 °С up to 80 °С.
| Index name |
Agrinol
МGE-4А |
Agrinol
МGE-10А |
Agrinol
МGE-22B |
Agrinol
МGE-46V |
Agrinol
МGE-68V |
| Meets classifications ISO VGISO 6743 (DIN 51524) |
5HН (HLP) |
15HН (HLP) |
22HL (HLP) |
46HM (HLP) |
68HM (HLP) |
| Kinematic viscosity at 40 °С, mm² / s |
More than 4,5 |
More than 12 |
17,0 – 24,2 |
41,4 – 50,6 |
57,0 – 74,8 |
| Viscosity index, not less than |
90 |
95 |
90 |
95 |
90 |
| Acid number, mg, КОН / g, not more than |
0,05 |
0,04 |
1,0 |
1,5 |
1,5 |
|
Temperature, °С:
-flash point in an open crucible, not less than
-pour point, not higher than |
94
– 50 |
125
– 40 |
145
– 30 |
190
– 28 |
200
– 25 |
Fraction of total mass, %, not more than:
- mechanical impurities
-water |
None
None |
0,015
Traces |
Tribological characteristics on Four-ball machine at (20 ± 5) °С and loading at 196 Н:
- deterioration index, mm, not more than |
0,72 |
0,65 |
0,55 |
0,45 |
0,45 |
Agrinol MGP
TS U 23.2-30802090-107:2008
Agrinol MGP-10 and Agrinol MGP-12 are fluids intended for shock absorbers that are used as working liquids in telescopic racks and hydraulic shock absorbers of lorries and cars. The environment temperature limits for the optimum engine performance by Agrinol MGP-10 rise from minus 50°C up to 100°C, and for liquid Agrinol MGP-12 from 40°C up to 100°C. Guarantee period of storage – 2 years from the day of manufacture.
| Index name |
Agrinol MGP-10 |
Agrinol MGP-12 |
Kinematic viscosity, mm² / s:
- at 100 °С, not less than
- at 50 °С, not less than
- at minus 20 °С, not less than |
–
10,01000,0 |
3,8
12,0
800,0 |
| Viscosity index, not less than |
– |
85 |
| Acid number, mg КОН / g, not more than |
0,15 |
– |
|
Temperature, °С:
- flash point in an open crucible, not less than
- pour point, not higher than |
145
– 50 |
140
– 40 |
Fraction of total mass, %, not more than:
- mechanical impurities
- water |
None
None |
| Zink fraction of total mass, %, not less than: |
– |
0,03 |
Tribological characteristics on ChShM at (20 ± 5) °С
- deterioration index, mm, at loading of 196 N |
– |
0,55 |
| Ash, %, not more than |
– |
0,5 |
ESh oils
ALL-UNION STATE STANDARD 10363-78
ESh OIL is used as a working liquid in control systems of heavily loaded mechanisms (self-propelled excavators etc). The environment temperature limits for the optimum engine performance by ESh Oils rise from minus 40°C up to 80-100°C.
GT OIL-50А
TS U 24.6-30802090-029:2005
GT OIL-50А is used as working liquids for hydrodynamic gears of diesel locomotives.
| Index name |
GT-50А |
ESh |
| Kinematic viscosity at 50 °С, mm² / s, not less than |
11 – 15 |
20 |
| Viscosity index, not less than |
80 |
135 |
| Acid number, mg КОН / g, not more than |
3,5 |
0,1 |
Temperature, °С:
- Flash in open crucible, not less than
- Pour point, not higher than |
160– 30 |
160– 50 |
Fraction of total mass, %, not more than:
-Mechanical impurities
- water
- water-soluble acids and alkalis |
None
None
None |
| Test for corrosion |
Withstands |
| Colour, units if CNT, not more than |
– |
4,0 | |
