Agrinol ATF ІІD, Agrinol ATF ІІI Print

TS U 23.2-36451680-134:2010
Agrinol ATF IID — mineral oil is used as a working liquid for automatic gearboxes, transmissions and power steering cars, as well as for power steering cars, trucks, buses, tractors, road and construction machinery, special foreign and home equipment in accordance with instructions of these vehicles manufacturers, where oils meeting the classifications GM Dexron IID, Mercon, Caterpillar TO-2, Volvo 97335 are used.

Agrinol ATF III — semi-synthetic oil to use as a working liquid in automatic gearboxes, transmissions and power steering cars, as well as for power steering cars, trucks, buses, tractors, road and construction machinery, special foreign and home equipment in accordance with instructions of these vehicles manufacturers, where oils meeting the classifications GM Dexron IIІ, Mercon V, MAN 339 type V-1, MAN 339 type Z-2, Caterpillar TO-2, Volvo 97340, ZF TE-ML-04D -14B, -16L, -17L are used.
 
Index name Agrinol ATF ІІD Agrinol ATF ІІI
Kinematic viscosity at 100 °С, mm² / s, not less than 7,5 + 0,5
Viscosity index, not less than 150 170

Temperature, °С:
-flash point in an open crucible, not lower than
-pout point, not higher than
185
– 42		  
175
– 45
Corrosive influence on metals, points, not more than 16
Sulfate ash, %, not more than 0,1
Fraction of total mass, %, not less than:
- sulfur, %, not less than
- mechanical impurities, %, not less than
0,4
None
1,0
None
Tribological characteristics on Four-ball machine at (20 ± 5) °С, N, not less than:
- deterioration index (314 Н), mm, not more than
0,5
 
 
Transmission oils Classic, Silver, Gold, Platinum Print
PREMIUM  GROUP
TS U 23.2-30802090-120:2009
TRANSMISSION — transmission multigrade oils are used for greasing of all types of gears: cylindrical, conical, spiral bevel and hypoid cars, trucks, buses, tractors; road and construction equipments. Transmission Oil Classic SAE 80W-90 API GL-4 is intended for greasing mechanical transmissions, cars, lorries and mobile equipment, as well as other sites where such level of oil- API GL-4 (TM-4) is recommended.
Transmission Oil Classic SAE 80W-90 API GL-4 is intended for greasing of mechanical transmissions, cars, lorries and mobile equipment, as well as other sites where such level of oil — API GL-4 (TM-4) is recommended.
Oils of the grade Silver SAE 85W-90 API GL-5, Gold SAE 80W-90 API GL-5 and Platinum SAE 75W-90 API GL-5 are intended for greasing of  mechanical transmissions with all types of gear, including hypoid. Can be used in driving axles and transfer boxes of cars, lorries and other mobile equipment operating in the most severe conditions, where the recommended level of oil is API GL-5 (TM-5). 
Index name TRANSMISSION Classic
80W-90 GL-4		 TRANSMISSION  Silver
85W-90 GL-5		 TRANSMISSION  Gold
80W-90 GL-5		 TRANSMISSION Platinum
75W-90 GL-5
Kinematic viscosity at 100 °С, mm²/s 16,5 17,5 17,5 13,5
Viscosity index, not less than 95 95 95 95
Temperature,  °С:
- flash point in an open crucible, not lower than
- pour point, not higher than
200
−20
210
−15
200
−20
185
−25
Sulphur fraction of total mass, %, not less than 0,8 1,0 1,0 1,0
Corrosive influence on metals Withstands
Tribological characteristics on Four-ball machine at (20±5) °С:
- welding loading, N, not less than
- scuff index, N, not less than
- deterioration index, mm, not more than		    3479
490
0,5		  
3687
568
0,4

3687
568
0,4		  3283
490
0,4
 
Oils ТАp-15V, ТАD-17i, ТSp-10, ТSp-15К, ТSp-14gip Print
ALL-UNION STATE STANDARD 23652-79ТАp-15V — is intended for greasing  of transmissions of trucks, road construction equipment and gear (spur, spiral bevel gearing, and worm gears, in which the contact stresses up to 2000 MPa and oil temperature is of 130 °C). In the middle climatic zone the oil is used all year-round at temperatures 25 °C below zero.ТAD-17i — The oil is intended for greasing  of all types of gears (including hypoid) of cars and other mobile equipment. Multigrade, operates at temperatures up to minus 30 °С. The upper limit of prolonged performance 140 °C.TEp-15 — it is used for greasing of cylindrical, bevel, and spiral bevel gears. Multigrade oil, operating at temperatures up to minus 23 °C.
 
Index name ТAp-15V TAD-17i ТEp-15
Meets classification SAE (API) 90 (GL-3) 85W-90 (GL-5) 90 (GL-2)
Kinematic viscosity, mm²/s:
at 50 °С
at 100 °С
–15,0
±1,0
110–120
Not less than 17,5
–
15,0±1
Viscosity index, not less than – 100 –
Corrosion test-within 3 hours:
- at 100 °С (plates of steel and cooper)
- at 120 °С (plates of steel), points, not more than
Withstands
–
–
2с
Withstands
Temperature,  °С:
flash point in an open crucible, not lower than
pour point, not higher than
185
−20
200
−25		  
185
−18
Tribological characteristics on Four-ball machine at (20±5) °С:
critical loading, N, not less than
scuff index, N, not less than
deterioration index at loading of 392 N, mm, not more than

3283
490
–

3687
568
0,40
–
–
0,55

  ALL-UNION STATE STANDARD 23652-79
ТSp-10 — It is intended for greasing of heavily loaded cylindrical, bevel and spiral bevel gears operating under the contact stresses up to 1500‑2000 MPa and temperatures of oil in volume up to 100‑110 °С. Winter oil, operating at temperatures up to minus 45 °С.
ТSp-15К — Multigrade transmission oil for greasing of heavily loaded cylindrical, bevel and spiral-bevel gears of heavy-vehicles KamAZ. Operates at temperatures up to minus 30 °С.
ТSp-14gip — It is used for hypoid gears of trucks. Multigrade oil, operating at temperature up to minus 30 °С. 
Index name ТSp-10 ТSp-15К ТSp-14gip
Meets classifications SAE (API) 80 (GL-3) 90 (GL-3) 90 (GL-5)
Kinematic viscosity, mm²/s:
at 100 °С, not less than
10,0
15,0±1
14,0
Viscosity index, not less than 90 85
Corrosion test-within 3 hours:
at 100 °С (plates of steel and cooper)
at 120 °С (plates of steel), points, not more than
Withstands
–
–
2с
Withstands
–
Temperature, °С:flash point in an open crucible, not lower thanpour point, not higher than  128−40  191−25  215−25
Tribological characteristics on Four-ball machine at (20±5) °С:
- critical loading, N, not less than
- scuff index, N, not less than
- deterioration index at loading of 392 N, mm, not more than
3479
470
–
3479
539
0,50
3920
588
–
 
 
Axial Oils Trade-mark L, Trade-mark Z, Trade-mark C Print
ALL-UNION STATE STANDARD 610-72
Axial oils are intended for lubricating  of necks of wheel pair pins of railway rolling stocks.
The trade marks L, Z, C are used in summer, winter period and winter period in particularly cold zones.

Agrinol Axial Year-Round          TS U 23.2-30802090-049:2006
The oil is used for greasing necks of wheel pair pins of carriages and diesel locomotives with slide bearings.
Index name Agrinol Axial
Year-round		 Axial Oils
Trade mark L Trade mark Z Trade mark C
Kinematic viscosity at 50 °С, mm² / s 28 42 – 60 Not less than 22 12 – 14
Temperature, °С:
flash point in an open crucible, not lower than
pour point, not higher than		 125
– 35		 135
–		 125
– 40		 125
– 55
Fraction of total mass, %, not more than:
mechanical impurities
water
water-soluble acids and alkalis
0,01
0,3
None
0,07
Traces
None
0,05
0,3
None
0,04
0,1
None
Dynamic viscosity at minus 20 °С, mPa·s, not more than 30000 – – –
 
Agrinol Nigrol, Hypoid A Print

Agrinol Nigrol
TS U 23.2-30802090-021-2002
Agrinol Nigrol oils are used as working liquids for reducers, low-loaded units of industrial equipment, open toothed gears, planetary toothed gears of cranes and excavators, toothed gears and transmission units of industrial equipment, tractors, agricultural and road-building machines, constructing devices.
Agrinol Nigrol-l Oils are recommended for usage at the following ambient temperature:
- trade mark А — from minus 5 °С up to 110 °С;
- trade mark B — from 0 °С up to 140 °С.
Agrinol Nigrol-z oils are recommended for usage at the following ambient temperature:
- trade-mark А — from minus 12 °С up to 110 °С;
- trade-mark B — from minus 10 °С up to 140 °С.
Hypoid oil А 
TS U 23.2-30802090-114:2009
Hypoid oil A is intended for greasing hypoid types of gears of obsolete cars models (GAZ-53, Zil-130, Moskvich 401-412, GAZ М-20, GAZ-21, GAZ-24 and others). 
 
Index name Hypoid A Agrinol Nigrol-Z Agrinol Nigrol-L
Trade mark A Trade mark B Trade mark A Trade mark B
Meets classifications SAE (API) 90 (GL-3) 90 (GL-1) 90-140 (GL-1)
Appearance Homogeneous liquid of black colour
Kinematic viscosity at 100 °С, mm²/s 20,5–32,4 18–22 27–34
Тemperature, °С:
flash point in an open crucible, not lower than
pour point, not higher than
180
-20		  
140
−12		  
180
−10
140
−5		  
180
0
Fraction of total mass,%, not more than
mechanical impurities
water		  
0,1
Traces
0,05
Traces
Corrosive influence on metals Withstands